Prong-plane|
|
Prong-plane
1.
Take a
sheet of A4 paper and fold across the diagonal along the line the the picture
above. To give you something like in the picture below.
2.
The next
step is to fold the corner down, again along the line in the picture. Once you
have completed this unfold.
3.
Next fold
down and crease along the horisontal line in the picture. And then push in at
the sides to give a double-layer. It should look like the next picture.
4.
Next fold
up along this line, the bottom edge should line up with the centre as in the
next picture. Do this to both sides!
5.
For step
5, fold down along the line on both sides. The two sides should be simectrical
and line up with the out side. This should look like the next picture when it
has been done.
6.
This step
makes the prongs. Simply fold up again! The bottom horisontal edge should touch
the diagonal top edge. Remember to do this to both sides.
7.
Step
7 is very simple, just fold down the top of the "triangle" along the
line.
8.
For the
penaulitmate step, fold the plane up along the halfway line.
9.
The final
step is to fold the wings down, do this by folding diagonally along the line
in the picture. I find the wings work best when at a slight V shape.
Flying tips:
- Have the wings at a V shape
- Add winglets it you find it spins
Designed by Josh England
bravenet.com